Roseler Company uses a normal job-order costing system. The company has two departments through which most jobs pass. Overhead is applied using a plantwide overhead rate of $14.00 per direct labor hour. During the year, several jobs were completed. Data pertaining to one such job, Job 9-601, follow:

Direct materials $12,000
Direct labor cost:
Department A (450 hours @ $18) $8,100
Department B (120 hours @ $18) $2,160
Machine hours used:
Department A 200
Department B 800
Units produced 1,000
Required:

1. Compute the total cost of Job 9-601.
2. Compute the per-unit manufacturing cost for Job 9-601. Round your answer to the nearest cent.
For Requirements 3 and 4, assume that Roseler uses departmental overhead rates. In Department A, overhead is applied at the rate of $3 per direct labor hour. In Department B, overhead is applied at the rate of $11.00 per machine hour.
3. Compute the total cost of Job 9-601.
4. Compute the per-unit manufacturing cost for Job 9-601. Round your answer to the nearest cent.

Question

02-03-2020
Business

contestada

Roseler Company uses a normal job-order costing system. The company has two departments through which most jobs pass. Overhead is applied using a plantwide overhead rate of $14.00 per direct labor hour. During the year, several jobs were completed. Data pertaining to one such job, Job 9-601, follow:

Direct materials $12,000
Direct labor cost:
Department A (450 hours @ $18) $8,100
Department B (120 hours @ $18) $2,160
Machine hours used:
Department A 200
Department B 800
Units produced 1,000
Required:

1. Compute the total cost of Job 9-601.
2. Compute the per-unit manufacturing cost for Job 9-601. Round your answer to the nearest cent.
For Requirements 3 and 4, assume that Roseler uses departmental overhead rates. In Department A, overhead is applied at the rate of $3 per direct labor hour. In Department B, overhead is applied at the rate of $11.00 per machine hour.
3. Compute the total cost of Job 9-601.
4. Compute the per-unit manufacturing cost for Job 9-601. Round your answer to the nearest cent.

Respuesta :

Otras preguntas

Jason's insurance company pays for 80% of the cost of an ambulance ride, after he pays a $200 deductible. The ambulance ride costs $1200. How much wold Jason p

Steve needs to take at least 24 milligrams of calcium, 15 milligrams of iron, and 16 milligrams of vitamins. Which ordered pairs of values are solutions for the

The balance of Chiaki's average balance checking account at the beginning of the last cycle was $100, and the only transaction for the cycle was a check that Ch

The radius of the base of a cylinder is 10 centimeters, and its height is 20 centimeters. A cone is used to fill the cylinder with water. The radius of the cone

Iconographic symbols are often associated with

The values √8 and √14 are plotted on the number line. What is the approximate difference in tenths between the two values? 0.5 0.9 1.1 2.4

a spinner and 4 cards are shown below. Jane spins the spinner and selects a card without looking. What is the probability that the spinner stops at purple and a

Mcarthur, hogben, edwards, heath, and mengler found that what percent of children are identified as having a specific reading disability and met criteria for dl

If the original 24 m edge length x of a cube decreases at the rate 5m/min, when x=3 at what rate does the cube's surface area change

Which does not explain an effect of the author's use of dialogue? A. It helps the reader understand what characters are thinking in the story. B. It helps the r

Zviko Zviko · Answer 1 · 2020-03-06T03:06:50+01:00

Answer:

Part 1. Computation of the total cost of Job 9-601

Total cost= Unit cost of Job 9-601 × Units Produced

= $30,240 × 1,000

= $30,240,000

Part 2. Computation of the per-unit manufacturing cost for Job 9-601

Direct materials $12,000

Direct labor cost:

Department A (450 hours @ $18) $8,100

Department B (120 hours @ $18) $2,160

Prime Cost $22,260

Manufacturing Overheads:

Department A (450 hours @ $14) $6,300

Department B (120 hours @ $14) $1,680

Unit Manufacturing Cost $30,240

Part 3. Computation of the total cost of Job 9-601

Total cost= Unit cost of Job 9-601 × Units Produced

= $24,930 × 1,000

= $24,930,000

Part 4. Computation the per-unit manufacturing cost for Job 9-601.

Direct materials $12,000

Direct labor cost:

Department A (450 hours @ $18) $8,100

Department B (120 hours @ $18) $2,160

Prime Cost $22,260

Manufacturing Overheads:

Department A (450 hours @ $3) $1,350

Department B (120 hours @ $11) $1,320

Unit Manufacturing Cost $24,930

Explanation:

Part 1. Computation of the total cost of Job 9-601

Total cost= Unit cost of Job 9-601 × Units Produced

Part 2. Computation of the per-unit manufacturing cost for Job 9-601

Addition of all Manufacturing Costs ( Direct and Indirect) gives the unit manufacturing cost.

Note: Overhead is applied using a plantwide overhead rate of $14.00 per direct labor hour for Both Department A and Department B

Part 3. Computation of the total cost of Job 9-601

Total cost= Unit cost of Job 9-601 × Units Produced

Part 4. Computation the per-unit manufacturing cost for Job 9-601.

Addition of all Manufacturing Costs ( Direct and Indirect) gives the unit manufacturing cost.

Note: Overhead is applied as follows: In Department A, overhead is applied at the rate of $3 per direct labor hour. In Department B, overhead is applied at the rate of $11.00 per machine hour.