It has been argued that power plants should make use of off-peak hours (such as late at night) to generate mechanical energy and store it until it is needed during peak load times, such as the middle of the day. One suggestion has been to store the energy in large flywheels spinning on nearly frictionless ball-bearings. Consider a flywheel made of iron, with a density of 7800 kg/m^3 , in the shape of a uniform disk with a thickness of 11.3 cm.

Required:
a. What would the diameter of such a disk need to be if it is to store an amount of kinetic energy of 14.1 MJ when spinning at an angular velocity of 93.0 rpm about an axis perpendicular to the disk at its center?
b. What would be the centripetal acceleration of a point on its rim when spinning at this rate?

Question

contestada

Respuesta :

Xema8 Xema8 · Answer 1 · 2021-02-02T03:17:43+01:00

Answer:

Explanation:

kinetic energy = 14.1 MJ = 14.1 x 10⁶ J

Let radius of flywheel be r .

volume of flywheel = π r² x t where t is thickness

= 3.14 x r² x .113 m³

= .04 r² m³

mass = volume x density

= .04 r² x 7800 = 312.73 r²kg

moment of inertia I = 1 / 2 mass x radius²

= .5 x 312.73 r² x r²

= 156.37 r⁴ kg m²

angular velocity ω = 2π x 93/60

= 9.734 rad /s

kinetic energy = 1/2 Iω² where ω is angular velocity

= .5 x 156.37 r⁴ x 9.734²

= 7408.08 r⁴

Given

7408.08 r⁴ = 14.1 x 10⁶

r⁴ = .19 x 10⁴

r = .66 x 10

= 6.60 m .

Diameter = 13.2 m

b )

centripetal acceleration of a point on its rim = ω² r

= 9.734² x 6.6

= 625.35 m /s²